1000W Magnetic Induction Heater Kit for Automotive Flameless Heat+8 Coils

Description

Description:
Attention:
Using Time: approx 1 minute (will automatically power off in order to protect the machine, can be used again after cooling)
Specification:
Voltage: 110V(US) 60Hz
Wattage: 1000W
Plug:US
Operating Temperature: -40 ° C ~ 60 ° C
Relative Humidity: <95% RH
Atmospheric Pressure: 86KPa~10KPa
Illumination: LED Light
Model Number:kIA-1KW
Certificate:CE(EMC,LVD),UL,CCC,Available for COC,POVC
Coil Diameter*Quantity:Φ30mm*2(PCS),Φ40mm*2(PCS),Φ50mm*2(PCS),Spare Wire*2(PCS)
Heating Bolt Diameter:Φ5-40mm
Heater Dimension:36CM*6.8Cm*6.8CM
The advantage of using this device is it is totally flameless,comparing with traditional way lf heating by
fire,it is much safer and of higher work efficiency,without the worry of harming the adjacent area,Light weight
do not deed water cooling,and very easy to use
Feature:
1.An heater is a key piece of equipment used in all forms of heating.
2.The inductor is a hand-held one with slip-resist ergonomic housing. Faster and safer than traditional torch.
3. Collateral damage normally associated with torches can also be eliminated.
4.A bright LED light exists to light up your work load.
Applications:
1. Preheat become attached or rusted fasteners and parts that need to be separate
2. Straighten small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on auto body parts when you restore or straightening.
3. Burning silent blocks, pressed on beams running gear or other machinery and equipment.
4. Heat treatment of metal parts, hardening, tempering, normalizing.
5. Pressing bearings on a hot landing, as well as flowability.
6. Snyatie small laminated glass sealants for metal.
7. Removing glued on painted metal spoilers, moldings, stickers.
8. The heating of the surface of the hood or other surfaces to be coated vinyl.
9. Removing rust from metal and car body by high-speed heating parts, and flaking rust.
10. Removing paint coating to a metal surface or body cars.
Safety Rules：
1.Read manual carefully before using.
2.Keep your work area clean.
3.Do not overreach, keep proper footing and balance at all times, proper footing and balance enables better control.
4.Do not use in moist surroundings or immerse it in water to electrical shock hazard and machine damage.
Note:
Please allow minor errors due to manual measurement.
Item color displayed in photos may be showing slightly different since monitors are not calibrated same.
Package Contents:
1pc of Magnetic Heater
8pcs of Coils
1pc of Charging Cable
1pc of Manual
1pc of Tool Box
Payment:
We only accept
PayPal
.
PayPal
is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding.
And please make sure that your PayPal registed address is the same with your eBay registed address.
Shipping:
The item will be shipped from our US Warehouse via
USPS First Class Package
(usually 2-6 business days to deliver) or UPS Ground (usually 1-5 business days to deliver) with tracking information, depending on shipping location.
Please feel free to contact us if you don't receive the package within one week. We will help you to solve the problem, thanks.
Return Policy:
If you are dissatisfied with our item or service, then please follow the good eBay practice to contact us by eBay message before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner.
We always reply to eBay messages within 1-2 business days. If you do not get a response from us, then please check your eBay message.
Only unused, undamaged and original condition item can be qualified for a return.
Feedback:
We strive for 100% customer satisfaction!
Positive Feedback
is very important to us. If you have any questions, please feel free to contact us instead of leaving negative feedback. We will reply your email within 24 working hours.