Guzzi Weber TB Gas/Petrol/Fuel fittings, spogots Centauro, Daytona

Description

A pair of Gas/Fuel/Petrol fittings for Weber Throttle Bodies. If you are looking for these, you understand the search after one breaks as you replace the rubber fuel lines. I hear the original straight one breaks the most often.
Included are 2 fittings, each with an O-ring and retaining pin. Contact me if you want to substitute 2 straight fittings, or 2 elbow fittings, or a single spigot fitting for this sale.
Designed after the Centauro Throttle Bodies, should be same as on the Daytona. Possibly other models. Barrel diameter is approximately .470in 0r 11.938mm. The throttle body castings may vary in manufacturing tolerances, but so far all items have fit well.
The Straight one is Aluminum, the 90 Degree Elbow one is Plastic. After 11 years, the first plastic ones in use are still holding up against the heat of the engine and chemicals of the gasoline. I make these, one at a time.
Willing to ship international
IF
you contact me first with enough information to calculate shipping costs, and
state that you understand higher shipping costs may apply,  and Customs may delay delivery.
Most items shipped internationally have been received within 10 days, but a few have taken nearly 6 weeks.
No hidden charges or handling fees to surprise you. I recycle shipping materials. Actual shipping costs are what I apply.
Thanks for looking!